Choose VirtuabotixRTC when you want to keep I2C free or are using a DS1302 module you already own. The VirtuabotixRTC library is a reliable, lightweight way to add timekeeping to your Arduino projects. Its straightforward functions and flexible pin assignment make it perfect for beginners and pros alike. Whether you’re building an automatic plant waterer, a data logger, or a programmable timer, this library has you covered.
| DS1302 Pin | Arduino Pin | |------------|--------------| | VCC | 5V | | GND | GND | | CLK | 6 | | DAT | 7 | | RST | 8 |
In this post, we’ll dive deep into what makes this library special, how to install it, and walk through practical examples to get your Real Time Clock (RTC) running in minutes. The VirtuabotixRTC library is designed specifically for the DS1302 real-time clock chip. Unlike the more common DS1307 or DS3231 (which use I2C), the DS1302 communicates via a 3-wire interface (CLK, DAT, RST). This makes it incredibly simple to wire up and frees your I2C pins for other sensors. virtuabotixrtc.h arduino library
int currentHour = myRTC.hours;
void setup() Serial.begin(9600);
else digitalWrite(ledPin, LOW); if (currentHour == 20 && myRTC.minutes == 0 && myRTC.seconds < 5) Serial.println("Evening – LED is OFF.");
delay(500);
void loop() myRTC.updateTime();