How To Open Bootloader Mode On Itel A48 Online

Press the Power button once to select it. Your device will now enter Bootloader/Fastboot Mode. Method 2: Using ADB & Fastboot Commands (For Advanced Users) This method requires USB Debugging to be enabled on your phone.

Power off your ITEL A48 completely. Wait 10 seconds.

Go back to Settings > System > Developer Options and turn on USB Debugging and OEM Unlocking .

On your ITEL A48, go to Settings > System > About Phone . Tap Build Number 7 times to enable Developer Options. How to Open Bootloader Mode on ITEL A48

On your PC, open a command prompt (CMD) in the folder where you have ADB and Fastboot installed.

Connect your phone to your PC via USB cable.

The Bootloader is a low-level piece of code that runs before the operating system (Android) on your ITEL A48. Accessing Bootloader Mode is essential for advanced operations like installing custom ROMs, gaining root access, or unbricking your device. Press the Power button once to select it

Keep holding both buttons until the screen turns on. You will see the ITEL logo, then a dark screen with small text.

Type the following command and press Enter:

Release both buttons. You are now in Factory Mode or SPD Upgrade Mode – this is the bootloader-equivalent interface for Spreadtrum (Unisoc) chipsets used in the A48. Power off your ITEL A48 completely

Press and hold the Volume Up (+) button and the Power button simultaneously.

Use the Volume Down button to navigate to the option labeled "Bootloader" or "Fastboot" (if available).