Cisco Ccna 200-301 Practical Lab Guide With Packet Tracer Pdf Apr 2026

enable configure terminal hostname R1 enable secret cisco line console 0 password ccna login exit line vty 0 4 password ccna login exit service password-encryption banner motd #Unauthorized access prohibited# interface g0/0 ip address 192.168.1.1 255.255.255.0 no shutdown : show running-config | show ip interface brief Lab 2 – VLANs & Trunking Topology : PC-A (VLAN10) – SW1 (Trunk) – SW2 – PC-B (VLAN10)

:

interface g0/0.10 encapsulation dot1Q 10 ip address 192.168.10.1 255.255.255.0 interface g0/0.20 encapsulation dot1Q 20 ip address 192.168.20.1 255.255.255.0 : ping from PC in VLAN10 to PC in VLAN20 Lab 5 – Static & Default Routing Topology : R1 — R2 — R3 enable configure terminal hostname R1 enable secret cisco

: NAT not translating. Checks : Inside/outside assignments, ACL permit statement, overload keyword.

ip route 0.0.0.0 0.0.0.0 10.2.2.2 : show ip route | ping Lab 6 – OSPFv2 Single area : ACL permit statement

ipv6 unicast-routing interface g0/0 ipv6 address 2001:db8:1:1::1/64 ipv6 enable :

ip dhcp pool LAN_POOL network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 (Packet Tracer only): enable configure terminal hostname R1 enable secret cisco

ipv6 router ospf 1 router-id 1.1.1.1 interface g0/0 ipv6 ospf 1 area 0 Standard ACL (block one host) :

network 10.1.1.0 0.0.0.3 area 0 network 192.168.2.0 0.0.0.255 area 1 : show ip ospf neighbor | show ip route ospf Lab 7 – IPv6 Addressing & Routing Configure IPv6 on interface :

router ospf 1 network 192.168.1.0 0.0.0.255 area 0 network 10.1.1.0 0.0.0.3 area 0 (R1 as ABR):

ip dns server ip host www.ccnalab.com 192.168.1.100 Topology : WLC – Switch – AP – Laptop (wireless)